Fire Alarms - PFC CONTROLS | Miami, Gate Operators, Sliding Gate, Swing Gate, Intercoms, Turnstiles, Bollards, Barrier gate

MENU
Go to content

Fire Alarms

Special Pages > Products
FIRE ALARM PANELS

SFC-102R
FACP Micropr. based, 2 Style B/Y, 4.2 Amp, Ann.SRAM-105, Red

  • The SFC-102 is equipped with two Style B (Class B) initiating circuits, two Style Y (Class B) notification appliance circuits, one Form "C" common alarm relay, one Form "C" common trouble relay, one non-switched Aux. Power output and one switched Aux. Power output.

  • The panel also has individual alarm, supervisory and trouble LED indicators per zone.

  • The panel features a 6.0A power supply, which provides a full 3.0A of NAC power, 0.5A Aux. power with the balance to run the panel and charge the batteries.

  • No extra transformers or added power supplies are required.

  • In addition the panels has 500mA of Auxiliary power with switched and un-switched outputs.



SFC-105R
FACP Micropr.based, 5 Style B Init.Zones, 2 Style Y Ccts, 4.2Amp, Red

  • The SFC-105 is equipped with five Style B (Class B) initiating circuits, two Style Y (Class B) notification appliance circuits, one Form "C" common alarm relay, one Form "C" common trouble relay, one non-switched Aux. Power output and one switched Aux. Power output.

  • The panel also has individual alarm, supervisory and trouble LED indicators per zone.

  • The panels feature a 6.0A power supply, which provides a full 3.0A of NAC power, 0.5A Aux. power with the balance to run the panel and charge the batteries.

  • No extra transformers or added power supplies are required.

  • In addition the panels has 500mA of Auxiliary power with switched and un-switched outputs.



SFC-200-6DDR
6 Zone Fire Alarm Panel c/w LCD Display & UDACT, Red Finish

  • The SFC-200-6DR and SFC-200-6DDR are equipped with six Class "B" (Style "B") initiating circuits and two Class "B" (Style "Y") indicating circuits rated @ 1.7 Amps maximum. (Total of 5 Amps)  

  • The SFC-200-6DDR is equipped with a built-in UDACT/Digital Communicator.  

  • One SICA-206 Six Initiating Circuit Class "A" Converter Modules may be used for Class "A" (Style "D") wiring of the initiating circuits.

  • One SOCA-202 Two Indicating Circuit Class "A" Converter Module may be used for Class "A" (Style "Z") wiring of the indicating circuits.  

  • The cabinet will support up to 12 AH batteries.

  • The panels can be semi-flush mounted with the optional SFC-200TRB trim ring. Note: Not ULC listed.




SFC-200-6LDR
6 Zone FAP w/ Alarm & Trouble LEDs & UDACT, Red

  • The SFC-200-6DR and SFC-200-6DDR are equipped with six Class "B" (Style "B") initiating circuits and two Class "B" (Style "Y") indicating circuits rated @ 1.7 Amps maximum. (Total of 5 Amps)

  • The SFC-200-6DDR is equipped with a built-in UDACT/Digital Communicator.

  • One SICA-206 Six Initiating Circuit Class "A" Converter Modules may be used for Class "A" (Style "D") wiring of the initiating circuits.

  • One SOCA-202 Two Indicating Circuit Class "A" Converter Module may be used for Class "A" (Style "Z") wiring of the indicating circuits.

  • The cabinet will support up to 12 AH batteries.

  • The panels can be semi-flush mounted with the optional SFC-200TRB trim ring.



SFC-201-12DDR
12 Zone Fire Alarm Panel c/w LCD Display & Udact, Red

  • The SFC-201-12DDR is equipped with twelve Class "B" (Style "B") initiating circuits and four Class "B" (Style "Y") indicating circuits @ 1.7 Amps maximum. (Total of 5 Amps).

  • One SICA-206 Six Initiating Circuit Class A Converter Module may be used for Class "A" (Style "D") wiring of the initiating circuits.

  • One SOCA-204 Four Indicating Circuit Class "A" Converter Module may be used for Class "A" (Style "Z") wiring of the Indicating circuits.  

  • The SFC-201-12DDR has a built-in UDACT/Digital Communicator and the cabinet will support up to 12 AH batteries.

  • The panel can be semi-flush mounted with the optional SFC-UNIV-TRB trim ring.



SFC-201-12LDR
12 Zone Fire Alarm Panel c/w LED Display & Udact, Red

  • The SFC-201-12LDR is equipped with twelve Class "B" (Style "B") initiating circuits and four Class "B" (Style "Y") indicating circuits rated @ 1.7 Amps maximum. (Total of 5 Amps)  

  • Two SICA-206 Six Initiating Circuit Class "A" Converter Modules may be used for Class "A" (Style "D") wiring of the initiating circuits.

  • One SOCA-204 Four Indicating Circuit Class "A" Converter Module may be used for Class "A" (Style "Z") wiring of the indicating circuits.  

  • The SFC-201-8LDR is configurable by the keypad (using the CFG-300 Configuration Tool) for onsite programming or by a PC for both onsite and remote programming.

  • The SFC-201-12LDR has a built-in UDACT/Digital Communicator and the cabinet will support up to 12 AH batteries.

  • The panel can be semi-flush mounted with the optional SFC-UNIV-TRB trim ring.



SFC-308K
Series 300 8 Zone Starter Kit US. Red

  • The SFC-300 Series panels come complete with Eight Class B (Style B) Initiating Circuits which may be configured as Four Class A (Style D) Circuits.

  • The panels can be expanded up to 24 Class B or 12 Class A circuits with the addition of the SDM-308 Initiating Circuit Module.

  • In addition the panels come equipped with Four Class A/B (Style Z/Y) Indicating circuits, which are each rated at 1.7 Amps.

  • The SFC-300 Series also include a 6 Amp Power Supply which powers the system and supplies two 4-wire reset-able regulated smoke power supply of 24 VDC 200mA maximum each.

  • The SFC-300 Series panels also allow for the addition of two SSM-304 Signal Modules or two SRM-308 Relay modules in place of the SDM-308 Initiating Circuit Adder Modules.

  • (Maximum of 3 Adder modules)



SFC-500 Series
Intelligent Fire Alarm Control Panels

The SFC-500 Series Fire Alarm Control Panels are single loop addressable panels with support for up to 60, 126 or 378 addressable points. The SFC-500 Series panels are equipped with a two line by 20 character back-lit LCD display, numerical keypad and an integrated UDACT/Digital Communicator.  The SFC-500 Series family also includes remote LED and LCD annunciators.

The SFC-500 Series panels are ideal for both new and  retrofit applications.  Designed for small to medium commercial, institutional and industrial occupancies, these panels are powerful enough to meet today's installation demands.  The SFC-500 Series panels are configurable by the keypad for onsite programming or by a PC for both onsite and remote programming.  Easy to install and simple to operate and configure, the SFC-500 Series panels enable the installer to configure the system to meet their specific requirements.

> Catalog


HEAT DETECTORS

System Sensor 5600
Mechanical Heat Detectors

System Sensor's 5600 series mechanical heat detectors offer a low-cost means for property protection against fire, and for non-life-safety installations where smoke detectors are inappropriate.



CR/CF-EWT Series
Explosion-Proof Heat Detectors

The CR/CF-EWT series of fire alarm Heat Detectors provide reliable fire detection in areas which are classified as hazardous. They are ULC listed for hazardous location Class I, Groups C and D; Class II, Groups E, F and G; Class III Weatherproof, Watertight and Dust-tight applications covered by Special Purpose Enclosures III, IV and V.



MIR-600 Series
Heat Detectors

Mircom's MIR-600 Series Heat Detectors are attractive, durable and feature combination rate-of-rise and fixed temperature operation. The MIR-600 heat detectors are available in 135 F(57 C) and 200 F (93 C) temperature ratings.  Rate-of-rise detects heat by quickly responding to a rapid temperature increase. Rate-of-rise units have a wide spacing allowance of 50-foot centers. See specification table for details. Fixed temperature reacts to heat by responding to a specific temperature setting. The MIR-600  Series detectors use the same reliable pneumatic rate-of-rise element of former models, but offer added aesthetic appeal.



CR/CF-MP Series
Moisture-Proof Heat Detectors

The CR and CF-MP Series Moisture Proof Detectors are designed for hazardous locations and Moisture Proof applications. Each Moisture Proof detector is available in single or multiple circuits with open and/or closed contact configurations, and any of the fixed temperature settings including 135, 165, 200 and 285 degrees Farenheit.
The Moisture Proof detector is characterized by a black phenol-plastic seal plate and black and white pigtail connections. It is specified for use in high humidity environments and areas that are subject to corrosive elements or spray washing. The suffix "MP" denotes "Moisture Proof".



SMOKE DETECTORS

Mircom MIR-65 Series
Conventional Smoke Detectors

The MIR-65 Series incorporate proven sensing technologies, together with advances in materials and electronics technology. Having a wide operating voltage of 9-33VDC, the MIR-65 Series detectors can be integrated into most Fire/Security systems.  The MIR-65 Series wide voltage range family consists of photoelectric smoke, ionization smoke, and heat detectors.



FIRERAY 50RU/100RU
Reflective Beam Smoke Detector

The system comprises of a single unit incorporating an infra-red transmitter and receiver. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analyzed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level is reached. The system is designed to be mounted so the beam will project between 1ft. (0.305 m) and 2ft. (0.61m) below and parallel to the ceiling. Lateral detection may be up to 30ft. (9.144m) on either side of the beam, providing a maximum total coverage area of up to 19,800 square feet (60ft. x 330ft. or 18.288m x 100m).



System Sensor I3 Series Photoelectric Smoke Detectors

The I3 series smoke detectors represent a significant advancement in conventional detection. The I3 family is founded on three principles: Installation Ease, Intelligence, and Instant Inspection.



Mircom MDH-SL2000 Series
4-Wire Low-Flow Duct Detectors

Mircom's MDH-SL2000 Series Duct Smoke Detectors  are available in 4-wire ionization and photoelectric models. The MDH-SL2000 Series Duct Smoke Detectors are the latest innovation for early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial and Residential applications.



System Sensor i3 Series Sounder and Relay Smoke Detectors

The i3 sounder and relay smoke detectors apply the guiding principles of installation ease, intelligence, and instant inspection in a series of specialty conventional devices.



System Sensor BEAM1224(S)
Single-ended Reflected Type Beam Smoke Detector

System Sensor's BEAM1224 is uniquely suited for protecting open areas with high ceilings — areas where other methods of smoke detection are difficult to install and maintain.


System Sensor DH400ACDCIHT
High-Temperature Duct Smoke Detector

The System Sensor DH400ACDCIHT is designed for interior or exterior duct applications where extreme temperatures can exceed standard detector capabilities. (For exterior applications use DH400 OE-1 outdoor enclosure.) The DH400ACDCIHT samples air currents passing through a duct to provide dependable performance for management of fans, blowers, and air conditioning systems. The twist-in, twist-out 1451DHHT High-Temperature ionization detector head allows easy removal for quick cleaning, maintenance, and replacement without removing the duct housing.


MANUAL STATIONS

SPS-100 Series
Manual Stations

Attractive and durable, Summit's SPS-100 Series of manual stations provide manual fire reporting. The SPS-100 Series manual stations are non-coded, single or double action devices which initiate an alarm when pulled. Resetting is accomplished by inserting a 1/8'' screwdriver from the front. The handle, once pulled will remain open and cannot be reset without utilizing the screwdriver.



SPS-200 Series
Manual Stations

Summit's SPS-200 Series Manual Stations provide manual fire reporting.  These high quality, die-cast metal manual stations are available in either single or dual action configurations with SPST contacts and terminal strip connections. The normally open contact, which closes when the manual station is activated, is rated for 1 amp, 30 VDC. The contacts are gold plated to avoid the risk of corrosion.



SPS-300 Series
Emergency Manual Stations

Summit's SPS-300 Emergency Manual Stations are high quality, die-cast metal manual stations that are designed to meet special use requirements. The SPS-300 are designed for indoor and outdoor use.

Summit's SPS-300 Emergency Manual Stations consist of two models. The SPS-301 and SPS-302 are both single action manual stations. The SPS-301 is finished in a Blue enamel and the SPS-302 is finished in a Yellow enamel



ADDRESSABLE DEVICES

200 Series
Intelligent Addressable Detectors

Summit's 200 Series Intelligent Addressable Detectors are designed to meet a wide range of applications. The detector’s address is set in its base providing a convenient and trouble free maintenance procedure. The detectors mount into a selection of base styles to accommodate installation requirements.



SIDH-200 SERIES
Intelligent Duct Smoke Detectors

Summit's SIDH-200 Series Intelligent Smoke Duct Detectors are the latest analog addressable innovation for early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial, and Residential applications.



SPS-200ID Series
Intelligent Addressable Manual Stations

Summit's SPS-200ID Series provide manual fire reporting.  These high quality, die-cast metal Intelligent Fire Alarm Manual Stations are available in either single or dual action configurations with a permanently attached addressable module.
The SPS-200ID Series stations are available as single or dual-action devices with key resets and a permanently attached addressable module . The addressable manual station has DIP switches which allow for address setting. Pulling the handle initiates the operation of the addressable module.



SIM-100 SERIES
Intelligent Addressable Modules

Summit's SIM-100 Series Intelligent Addressable Modules are designed to meet a wide range of applications. The monitor and control modules can be used to supervise and activate sounders, strobes, door closers, pull stations, waterflow switches, conventional smoke detectors and more. An eight position dip switch allows for the address setting of the device and the wiring class/style of the devices that are connected to the module. All modules mount in a standard 4" x 4" x 2 1/8" junction box.



SIGNALING DEVICES

Mircom FH-240
Select-A-Horn Series

The FH-240 Select-A-Horn Series is designed to comply with NFPA/ANSI audible emergency evacuations signal and UL 464 audible signaling appliances. The Horn provides two different field selectable tones, and a High/Low output setting that can be achieved with the use of mini jumpers located on back of the unit.



Mircom BL-6B/BL-10B
Motorized Steel Bells

Mircom's BL-6B and BL-10B Motorized Steel Bells are designed for today's fire alarm applications. The durable steel construction provides loud resonant tones necessary for fire alarm installations.


PFC CONTROLS
1638 NW 108TH AVE. MIAMI, FL 33172
Sales: (305) 593-0227
Tech: (305) 546-3965

Copyright, All rights reserved
Back to content