Automatic Doors
Main Menu > PEDESTRIAN ACCESS
SLIDING DOORS
DITEC VALOR HH-HS
Complete hermetic entrance systems
VALOR HS
Is an automation system for doors with hermetic vertical closure and
semi-hermetic horizontal closure: the wing provides a partial seal,
abutting on the uprights of the frame and touching the
crosspiece of the floor.
VALOR HH
Is an automation system for doors with hermetic closure on all 4 sides;
as it closes, the wing moves vertically and horizontally to press against
the seals along the entire perimeter of the frame and along the floor.
> Brochure
DAS200
Automation for commercial sliding doors.
- Power supply 24 V DC.
- Batteries (opcional).
- Max. opening and closing speed (2 wings) 1,6 m/s
- Max. wing weight: 200 Kg.
> BROCHURE
DAS200T
Automation for telescopic sliding doors.
- Power supply 24 V DC.
- Batteries (opcional).
- Max. opening and closing speed (2 wings) 1,6 m/s.
- Max. wing weight: 320 Kg.
> BROCHURE
SWING DOORS
SPRINT
Swing door operator
For wings up to 110 Kg.
> Brochure
Swing door operator
For wings up to 110 Kg.
> Brochure
ACCESSORIES
COM E
Digital programmer for REX automation.
Features
Designed for fitting to a wall, on flat surfaces or recessed.
COM H
Rotary programmer
Features
Double interchangeable front, for sliding or swing doors.
COM K
Rotary programmer with Key
Features
Double interchangeable front, for sliding or swing doors.
PID24
No-touch button
The door is operated by passing the hand over the device, without exercising any pressure: the lack of contact makes it possible to maintain a higher level of hygiene.
> Manual
PBR45
4.5 inch round and square push plates improve overall access, enhance accessibility for those with disabilities and seamlessly integrate with an automatic door’s activation. These ADA-compliant push plates are available in a variety of popular design options, including alternative accessibility artwork.
These push plates may be hard wired to the door operator or connected to BEA’s line of wireless transmitters.
> Brochure
PANTHER
Panther series consists of 900 MHz or 433 MHz wireless technology integrated into 6 inch round, 4.75 inch round and 4.75 inch square push plates.
With an integrated wireless transmitter and mounting box, the Panther series reduces installation time by eliminating the need to run wires from the push plate or use additional mounting hardware. This offers greater mounting flexibility in areas where hardwired push plates cannot be mounted.
> Brochure
SENSORS
PASS24
- Power supply 24 VDC
- Protection degree IP54
- Temperature from -20° C to +55°C
- Max installation height 3 m
- Motion Detector
EAGLE6
Overhead activation sensor for sliding, swinging, and revolving doors utilizing K-band microwave technology.
Overhead activation sensor for sliding, swinging, and revolving doors utilizing K-band microwave technology.
- Power supply 12-24V AC/DC
- Maximun detection area: 13ft (W) x 6.5ft (D)
- Minimum detection speed: 2.2 in/sec.
> Brochure
PASA / PASA3
- Power supply 12-24 V AC/DC
- Protection degree IP44
- Temperature from -20° C to +55°C
- Max installation height 3.5 m
- Two way Motion Sensor
PAS024AMT
- Power supply 12-24 V AC/DC
- Protection degree IP54
- Temperature from -25° C to +55°C
- Max installation height 3.5 m
- Opening & safety sensor for automatic sliding doors
IXIO-DT1
Activation and safety sensor, combining the highest quality and the best value for the automatic sliding door industry.
This dual technology product is a highly flexible and user-friendly solution for sliding doors, industrial doors, vehicle gate detection and off-door automation.
> Brochure
FALCON
Overhead activation sensor for industrial environments utilizing microwave technology.
> Brochure
Overhead activation sensor for industrial environments utilizing microwave technology.
- Power supply 12-24V AC/DC
- Maximun detection area: 13ft (W) x 16ft (D)
- Minimum detection speed: 2.2 in/sec.
> Brochure